Despite washing, polish and painting of the running gear the bodywork
and wheels still looked dull. They had been washed several times but it
does not shine. I set to washing the wheel with Gunk, an engine
degreaser Click HERE for
website thinking that would do the job. Things got serious when I got
the toothbrush out. The Gunk was loosening the dirt but it need sone scrubbing to lift the dirt off the wheels. Cast wheels with twin discs
are fiddly to clean. There are lots of nooks and crannies. Forty
minutes of scrubbing had made a difference to the front wheel. It looked
much better. The back wheel is not so difficult to get at so gunking
and scrubbing did not take so long or was as difficult. There is still
some skin on my knuckles when I was finished. Washing off the Gunk with
hot soapy water revealed some shiny wheels.
I decided to try the gunk on the bodywork. There was quite a lot of
accumulated tar on the lower half of the fairing. I tried brushing Gunk
on which had little effect. I then put sone gunk on the rag on gently
rubbed the area. I was pleased with the results on two fronts; 1,the
paint did not come off and B the muck did come off. The Gunk dissolved
the tar and cut through the road dirty. With this discovery I went all
over the body work with gunk on a rag. More hot soapy water the rinse
off the Gunk and the job was done. The bike fairly sparkled. It made a
nice job of the the crud that had built up on the headlights lens.
The bike dried quickly in the sun so I thought "make hay". I found some T-Cut (click HERE
for website) in the garage cupboard. I carefully applied the T-cut. If
you are not careful you can cut right through the paint. I let the T-Cut
dry and buffed it off. Again there was dirt on he rag and the paint
shone a little more. Whilst we are at it I might as well go mad I
thought. I rummaged in the garage cupboard for Turtle wax polish (click HERE
for website) . This was applied to the panels and allowed to dry then
was buffed off. For the first time the bike shone. Metallic grey is not
that easy it make shine been there was a clear difference between
starting and finishing.
The downside is that the smell of Gunk lingers so we had a smelly
garage for several days. My hands were filthy and there was buckets of
water about so there are no photos of the cleaning session.
Monday, May 11, 2020
Cleaning
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment