The lamp on the left is the one I am replacing. The one on the right is what was delivered.
The near-side lamp was easily replaced by simply reaching past the headstock, inserting the new LED into the lamp holder. I had the lamp holder out to check the bulb so I could order the correct fitting. I flicked on the light switch to check the lamp was working then wriggled it back into the lamp housing. The off-side lamp was not nearly so easy.
I started with reaching past the headstock into the bowels of the fairing, as I had done with the other side. I should have realised I was being led into a false sense of security with the ease of the replacement on the near-side. I could not locate or even reach the back of the near-side lamp housing much less pull out the lamp holder. I removed the binnacle area of the fairing. Ten screws and numerous panel poppers later the dashboard was out of the way giving a little more access. it took a bit of yoga like positions to finally see the back of the lamp holder. Once I got my fingers on the rubber lamp holder it took a fair bit of tugging and wiggling to work the lamp holder free of the lamp housing. Swapping the old bulb for the new ones took seconds. The light switch was flicked and the lamp came on. The it was a case of refitting the panels with the screws and poppers then retest the light switch. Yup the light still work. It is not always the case. Fitting the lamp holder into the holder sometimes dislodges the bulb and it fails to illuminate. It worth a quick test before the bike is put away.
The side lights are now the same colour as the day riding lights on the mirror pods. The previous LEDs had a blue tinge to them and were not quite so bright.
So that is another upgrade for a hours work.