When I got the Pan the first upgrade I wanted was a Sat Nav.
The Sat Nav in my truck is not waterproof and not compatible with
motorbike mounting systems. However this upgrade was not the most
important. A number of other jobs where in the queue both this gadget.
It took ages to research which Sat Nav I should buy. I had a budget for
a middle ground Sat Nav. I do not need world coverage and lots of bells
and whistles but it had to be bike orientated. I spent lots of internet
time trying to find recommendations for the gadget that fitted my
budget and specification. I have been watching a YouTuber call Itchy
Boots. Click HERE for
her website. She uses a Sat Nav. I looked up the model she uses and
found it was not expensive and if you linked it to your phone you could
get live updates. This function, if built in, really ramps up the cost
of the unit. This unit is bike friendly and waterproof. If it can take
Noraly round the world, it can trundle me round the UK.
The unit I bought was a Garmin 396 (its what Noraly uses). I searched on-line and found Sport Bike Shop
was doing a deal on them. So a unit reserved online and collected at
the weekend of the same week from their shop in Milton Keynes.
It also has included in the box were two power lead options and several
mounting solution based on the Ram mounting system. Handy because:
A.Its included in the price
B. One of the first things I bought was a Ram. I knew I would have a Sat Nav eventually so when I saw a bargain I snapped it up.
I fitted the Ram mount when I fitted the risers. You can read about that HERE
Obviously I chose the RAM mount that suited the RAM mount I had installed
earlier. It is just a clamp with a ball grasp at both ends. Having
decided on the mounting method next was powering the unit. The obvious
choice was the mount that allowed for the quick removal of the Sat Nav
and the automatic and weatherproof power connection. The quick fit Sat
Nav mount just clips to the back of the Sat Nav. You then have to fit
the mounting ball plate which joins the quick fit plate of the RAM
mount. During back plate fitting exercise you have to install the power
lead. It all fits together very easily. Next the straight clamp joins
the two ball mounts together supporting the sat Nav at the same time.
Then the power lead is threaded down the handle bars. I used the clutch
hose as a guide and used the hose guides to keep the power cable tidy.
Initially I thought I was going to power the Sat Nav off the
distribution board but a thought better of it and chose to have the unit
powered through a switched feed. That meant the near side of the
fairing had to come off to reach the switched power feed wire. Having
gained access I stripped a section of the switched power lead and
soldered on a short wire with a bullet connector on the other end. The
power lead provided with the unit had a bullet connector fitted to the
positive wire and a ring connector fitted to the negative lead. The
bullet connectors were joined up the taped up the waterproof them. the
negative tag was connected the earth point. With some difficulty the
fairing was refitted. The Sat Nav sparks up when the ignition switch is
turned on and goes off with the key.
There is Smartphone connectivity via Bluetooth and Garmin’s Smartlink app which providers for :
- free live traffic and weather
- rugged, glove-friendly 4.3″ display
- adventurous routing
- service history log
- hands-free calling
- smart notifications
- built-in WiFi
- micro SD card slot
- LiveTrack
- the ability to send GPX files from your phone to the GPS and share them with other riders
I just need to have a spin out on the Pan to decide the optimum position for the unit and try out all the features.