This job was really about servicing the remote preload unit. On my rides I have been fiddling about the preload to get a comfy ride and improve cornering. This bike tends to wash out in corners and on roundabouts. There is no adjustment on the front suspension. There are few suspension settings to adjust on the rear suspension unit, just preload and rebound damping. My wife and I are probably in the middle weight range, even a bit lighter than the expected Pan riders, so the spring rate should not be an issue. There is nothing I can do about the spring rate rebound or the damping except adjust the screw. The preload adjuster is a different matter. A little bit of internet research showed the preload unit was prone to loosing fluid and so the ability to adjust the preload on the shock. Click HERE to check out this Youtube video for the details on how to asses if the preload adjuster needs attention and how to go about the job. You need the seats removed but not the fairing just the nearside side panel. You don't many tools. A 10mm socket, a Phillips screw drive and a pointy probe. It is not clear in the videos but you top up the unit with fork oil. I happened to have 10 weight oil left over from the front suspension overhaul.
The next job will to go for a spin and adjust the preload the damping to suit me.


